MEASURE THE WINDOW. KEEP THE PRODUCT IN VIEW.

Find Your Product’s Measuring Guide

Choose an exact AiryBlinds product to find its measuring notes. Size meanings and allowances stay product specific.

FAUX WOOD · 2-INCH SLATS / PRODUCT-SPECIFIC

Custom 2-Inch Faux Wood Blinds

  1. Choose inside or outside mount on this exact product before entering dimensions.
  2. For inside mount, measure the opening width at the top, middle and bottom and use the narrowest measurement. Do not make your own deduction.
  3. For outside mount, enter the required finished coverage, including your intended overlap. Check the current page for the remaining measuring steps.
Open this product’s full instructionsInstallation overview

The current page describes a factory fitting allowance without a numeric value. Do not borrow a number from another listing.

FAUX WOOD · 28-FINISH LISTING / PRODUCT-SPECIFIC

Custom 2-Inch Faux Wood Blinds – 28 Finishes

  1. Keep this 28-finish product selected while checking mount and size instructions.
  2. For inside mount, enter the exact opening measurement specified by this page; do not deduct yourself. This listing currently describes a 0.4-inch factory allowance.
  3. For outside mount, enter the full finished coverage including overlap. Recheck the current instructions before ordering.
Open this product’s full instructionsInstallation overview

The stated allowance applies only to this listing’s inside-mount instructions. It is not a shared rule for all blinds.

SOLID WOOD · 2-INCH SLATS / PRODUCT-SPECIFIC

Custom Solid Wood Blinds

  1. Choose the material, mount and controls on the solid-wood product page.
  2. For inside mount, measure width at three points and use the narrowest; measure height at three points and use the tallest. Do not deduct yourself.
  3. For outside mount, use the desired finished coverage. Check mounting depth, trim and handles against this product’s instructions.
Open this product’s full instructionsInstallation overview

Solid-wood allowances remain separate from the faux-wood and aluminum instructions. Natural grain and color variation are part of the material.

ALUMINUM · 1-INCH SLATS / PRODUCT-SPECIFIC

Custom 1-Inch Aluminum Blinds

  1. Choose the aluminum product’s mount type before entering your measurements.
  2. For inside mount, use the narrowest exact opening width. Do not deduct yourself; this product currently states a 0.4-inch factory allowance.
  3. For outside mount, specify the finished coverage. Check all other dimensions and the supplied mounting hardware for this product.
Open this product’s full instructionsAsk about installation

This is an aluminum-specific measuring summary. Installation instructions must match the aluminum hardware.

FAUX WOOD · L-SHAPED SLAT PROFILE / PRODUCT-SPECIFIC

Custom 2-Inch L-Shaped Faux Wood Blinds

  1. Confirm that you want the L-shaped slat profile, then choose your mount and controls on this exact product.
  2. Contact AiryBlinds with the product link and your window measurements to confirm the size-entry and production allowance before ordering.
  3. Match the installation instructions to the supplied headrail and bracket kit. Do not assume another blind’s dimensions apply.
Open this product’s full instructionsAsk about installation

A numeric measuring allowance is not reproduced here because the current product page still contains a factory-rule confirmation note.

AFTER YOUR BLINDS ARRIVE

Installation is a separate step.

Our illustrated overview follows the matching hinged box-bracket system used in the supplied wood and faux-wood footage. It does not set your order dimensions or clearance.

Watch the installation overview

A few things worth knowing.

Can I use one measuring rule for every blind?

No. Start with the exact product. Size meaning, mounting space and production allowance can differ.

Can my custom order be cancelled?

The current policy allows cancellation within 24 hours of payment only before production begins. Contact AiryBlinds promptly and review the full custom-order terms.

What if my order arrives damaged or incorrect?

Contact AiryBlinds with your order details and photos. The policy provides a replacement or resolution for damage, manufacturing defects or a mismatch with the submitted configuration. Report shipping damage with photos within 3 days of delivery.

A LITTLE GUIDANCE GOES A LONG WAY

A clearer choice,
with a little help.

Have your product link and a photo of your window ready. We can help you find the right next step.

Contact AiryBlindsFind measuring help →